Logo - Corghi EXACT 70 II Manual De Uso

CHECK" section, at switch-on
No
➥ Vehicle selection
Always activated: Selection of vehicle from
data bank always activated.
On request: Selection of vehicle from data
bank activated on request.
➥ Vehicle selection mode
Databank: Selection of vehicle from data-
bank, job record compilation on request
Job record: compilation of job record with
activation of vehicle from databank if neces-
sary.
➥ Rim diameter
Always: If toes are set in millimetres or inches
the step for input of the rim diameter is always
activated.
On request: If toes are set in millimetres or
inches the step for input of the rim diameter
is activated by the operator, or automatically
if the reference diameter is not available in
the databank.
➥ R.O.C.
Always: R.O.C. procedure is compulsory.
Manual skip: R.O.C. procedure is always ac-
tivated but can be skipped in manual mode.
Automatic skip: R.O.C. procedure is skipped
automatically (can be performed later by
manual recall).
➥ Caster measurement steering lock
Always activated: Caster measurement steer-
ing lock always activated.
On request: Caster measurement steering
lock activated on request.
If adjustable: Caster measurement steering
lock only recalled if at least one of the angles
that can be measured is adjustable (caster,
king pin, steering angle difference at 20° and
maximum steering angle).
➥ Rear
Always activated: Rear axle adjustment always
activated.
If adjustable: Rear axle adjustment only ac-
tivated if at least one of the angles that can
be measured is adjustable (half toe, camber,
total toe, setback).
Wheel Aligner Customisation
➥ Electronic turntable enabling
Always: electronic turntables for maximum
steering angle always enabled.
Operator's Manual EXACT 70 II
On request: electronic turntables for maxi-
mum steering angle enabled on request
during steering angle measurement.
Never: electronic turntables for maximum
steering angle never enabled.
➥ Axis of reference
Symmetry: axis of symmetry is axis of refer-
ence for both front and rear.
Thrust: thrust axis is axis of reference for both
front and rear. Setting the steering-wheel
with the front half toe values equal ensures
the steering wheel will be straight in normal
operating conditions. If the thrust axis is axis
of reference for the rear axle, the rear half toe
values area always identical.
Straight steering wheels: reference axis is axis
of symmetry for rear and thrust axis for front.
Setting the steering-wheel with the front half
toe values equal ensures the steering wheel
will be straight in normal operating conditions.
➥ Save previous data
Automatic: vehicle situation before adjust-
ment is saved automatically.
Manual: vehicle situation before adjustment
is saved in manual mode.
➥ Caster measurement steering lock
20°: Steering always locked to 20° for caster
measurement.
User's choice: Caster measurement steering
lock at 10° or 20°.
➥ Front axle adjustment
Caster.
Total toe – setback.
➥ Rear axle adjustment
Total toe – thrust angle.
Setback – track difference.
➥ Thrust angle
Clockwise positive: angle is positive when
thrust axis is turned clockwise in relation to
the axis of symmetry.
Anticlockwise positive: angle is positive when
thrust axis is turned anticlockwise in relation to
the axis of symmetry.

Logo

The logo is the image shown as background in
the "Main Menu" (fig.33) and used as three-
dimensional image in the screen saver.
2 customised logos can be entered: they are
selected from the set-up as the "Customised 1"
and "Customised 2" logos.
The customised logo files must be in bitmap for-
EN
67