GENERAL INFORMATION
1. GENERAL INFORMATION
No part of this publication may be reproduced, copied,
filed or transmitted in any shape or form without
the permission of Johnson Controls-Hitachi Air
Conditioning Spain, S.A.U.
Within the policy of continuous improvement of its
products, Johnson Controls-Hitachi Air Conditioning
Spain, S.A.U. reserves the right to make changes
at any time without prior notification and without
being compelled to introducing them into products
subsequently sold. This document may therefore have
been subject to amendments during the life of the
product.
Hitachi makes every effort to offer correct, up-to-date
documentation. Despite this, printing errors cannot be
controlled by Hitachi and are not its responsibility.
As a result, some of the images or data used to illustrate
this document may not refer to specific models. No
claims will be accepted based on the data, illustrations
and descriptions included in this manual.
2. SAFETY
2.1
Applied symbols
During normal heat pump system design work or unit
installation, greater attention must be paid in certain
situations requiring particular care in order to avoid
injuries and damage to the unit, the installation or the
building or property.
Situations that jeopardise the safety of those in the
surrounding area or that put the unit itself a risk will be
clearly indicated in this manual.
To indicate these situations, a series of special symbols
will be used to clearly identify these situations.
Pay close attention to these symbols and to the
messages following them, as your safety and that of
others depends on it.
!
DANGER
• The text following this symbol contains information and
instructions relating directly to your safety, in addition to
hazards or unsafe practices which could result in severe
personal injuries or death.
• Not taking these instructions into account could lead to
serious, very serious or even fatal injuries to you and others
in the proximities of the unit.
In the text following the danger symbol you can also
find information on safe procedures during unit
installation.
!
CAUTION
• The text following this symbol contains information and
instructions relating directly to your safety, in addition to
hazards or unsafe practices which could result in minor personal
injury or product or property damage.
• Not taking these instructions into account could lead to minor
injuries to you and others in the proximities of the unit.
• Not taking these instructions into account could lead to unit
damage.
PMML0596 rev.0 - 04/2022
In the text following the caution symbol you can
also find information on safe procedures during unit
installation.
NOTE
• The text following this symbol contains information or
instructions that may be of use or that require a more thorough
explanation.
• Instructions regarding inspections to be made on unit parts or
systems may also be included.
Symbol
Before installation, read the
installation and operation
manual, and the wiring instruction
Before performing maintenance
and service tasks, read the service
For more information, see the
installer and user reference guide.
2.2
Additional information about Safety
!
DANGER
• DO NOT CONNECT THE POWER SUPPLY TO THE INDOOR UNIT
PRIOR TO FILLING THE SPACE HEATING AND DHW CIRCUITS
WITH WATER AND CHECKING WATER PRESSURE AND THE
TOTAL ABSENCE OF ANY WATER LEAKAGE.
• Do not pour water over the indoor unit electrical parts. If the
electrical components are in contact with water a seri ous
electrical shock will take place.
• Do not touch or adjust the safety devices inside the air to
water heat pump. If these devices are touched or adjusted, a
serious accident can take place.
• Do not open the service cover or access inside the air to water
heat pump without disconnecting the main power supply.
• In case of fire Turn OFF the main switch, put out the fire at
once and contact your service contractor.
• It must ensure that the air to water heat pump cannot
op erate accidentally without water neither with air inside
hydraulic system.
!
CAUTION
• Do not use any sprays such as insecticide, lacquer, hair spray or
other flammable gases within approximately one meter from
the system.
• If installation circuit breaker or the unit fuse is often activated,
stop the system and contact your service contractor.
• Do not make service or inspections tasks by yourself. This work
must be performed by a qualified service person.
• This appliance must be used only by adult and capable people,
having received the technical information or instructions to
handle this appliance properly and safely.
• Children should be supervised to ensure that they do not play
with the appliance.
• Do not let any foreign body into the water inlet and outlet piping
of the air to water heat pump.
Explanation
sheet.
manual.
1
EN