Tractel Blocfor Manual De Instalación, De Utilización Y De Mantenimiento página 9

4. Never exceed allowable capacity of your fall
protection equipment.
5. Never exceed maximum free fall distance of your
fall protection equipment.
6. Training workers includes setting up rescue
procedures should a fall occur during a job prior
to putting the systems into operation. A qualified
person or technical consultant according to work
conditions must set up such procedures.
7. Comply with locally applicable labor regulations.
1.1.4. Your duty to avoid taking chances
1. If the weight of the operator plus that of their
equipment is between 220 lb. (100 kg) and 330 lb.
(150 kg), it is essential to make sure that the total
weight does not exceed the safe working load of
each component of the fall arrest system.
2. This equipment should not be used beyond its
limits or in any situation other than that for which
it is designed: see Section "4. Functions and
description".
3. This system is man rated. It must only be used in
conjunction with personal fall arrest equipment
that limits the average arresting force to 400daN
(900lbs).
4. Before each use of a fall arrest system, make sure
that there is adequate vertical clearance and that
there are no obstacles in the path of the fall.
5. A full body harness in accordance with ANSI
Z359.18-2017 and CSA Z259.15-17 is the only
equipment around the body that may be used in a
fall arrest system; secure it to the dorsal D-ring of
the harness.
6. It is essential for operator safety that the device or
anchor point is correctly positioned and that work is
carried out so as to minimize the risk of falls.
7. For operator safety, the dealer must supply
the following if the product is resold instruction
manual and maintenance instructions for periodic
inspections and repairs, all drafted in the language
of the country of use of the product.
8. Each system is rated for a specific number of
operators with a specific weight. Please refer
to section "4 Function and description" or to the
corresponding manual.
9. In addition to fall protection equipment, it is essential
for the safety of the operator and supervisor that
they use personal protective equipment such as
helmets, safety glasses, gloves, and safety shoes
when handling and using this product.
10. The product may only be used with the associated
equipment described in this manual (see chapter 7.
Associated equipment).
11. This product may only be used in the presence of at
least two operators.
All manuals and user guides at all-guidesbox.com
12. Do not use more than two associated pieces of
equipment on the product at the same time.
13. Follow the combinations of associated equipment
permitted in this manual.
14. Davitrac™+ or Davitrac™ is to be used either as a
material hoist or for fall arrest and rescue solutions
only. Do not use for both material handling and
man-rated application at the same time.
15. Danger While using several pieces of equipment
where the safety function of one may affect or
interfere with the safety function of another.
16. Tractel Ltd. declines any responsibility for the
consequences of dismantling or altering the
components of the Davitrac™+ or Davitrac™
beyond the description in this manual.
17. Once the Davitrac™+ or Davitrac™ is in operation
it is imperative not to release, remove, alter or
obstruct any part of the equipment under load.
18. For any job to be performed on the Davitrac™+ or
Davitrac™, consider and control the specific risks
related to the nature of the job.
19. Safety depends on the safe conditions of the
Davitrac™+ or Davitrac™ and the attached
components. Never clamp, knot, or prevent the wire
rope from coiling properly or being taut. Do not allow
twists to form in the wire rope to prevent proper
coiling. Never allow twisted wire rope to create slack
conditions and load the system dynamically.
20. Should you decide that the Davitrac™+ or
Davitrac™ is no longer to be used, take precautions
in disposing of it so that it cannot be used anymore.
21. Tractel declines any responsibility for any special
rigging or structural combinations beyond the
descriptions of this manual.
22. Tractel declines any responsibility for any other use of the
Davitrac™+ or Davitrac™ than described in this manual.
23. Do not mix and match other components. Only use
configurations and components as shown in this
manual.
24. The supporting structure is required to withstand
every load to be applied, either static or dynamic,
during rigging or operating the Davitrac™+ or
Davitrac™.
25. Only bases, equipment and accessories supplied or
approved by Tractel shall be used with this system.
Always concerned to improve the quality of its products,
the Tractel
specifications of the equipment described in this manual.
Group reserves the right to modify the
®
NOTICE
For any special application, contact Tractel
EN
.
®
9