Idiomas disponibles
Idiomas disponibles
control handle.
All operation positions must be selected between the maximum and minimum position.
The symbol on the control panel, next to the control handle will indicate which burner it
operates.
AUTOMATIC IGNITION WITH FLAME FAILURE SAFETY DEVICE
The appliance is fitted with a flame failure safety device on each burner, which is designed
to stop the flow of gas to the burner head in the event of the flame going out.
TO IGNITE A BURNER
Press in the control knob of the burner that you wish to light and turn it anti-clockwise to the
maximum position.
If you keep the control knob depressed, the automatic ignition for the burner will operate.
You should hold down the control knob for 15 seconds after the flame on the burner has not
lit, stop operating the device and open the compartment door and/or wait at least 1 minute
before attempting a further ignition of the burner.
After this 15 second interval, to regulate the flame you should continue turning the control
knob anti-clockwise until the flame is at a suitable level. The operating position MUST be at
a position between the maximum and minimum position.
To switch the burner OFF, turn the control knob fully clockwise to the gas OFF position.
In case of power failure, the burners can be lit by carefully using a match.
SAFETY AND ENERGY SAVING DEVICE
It is recommended to use roasting pans, frying pans or grill stones heated simultaneously on
several burners because the resulting heat build-up may damage the appliance.
Do not touch the top plate and trivet whilst in use for a certain period after use.
As soon as a liquid starts boiling, turn down the flame so that it will barely keep the liquid
simmering.
The diameter of the bottom of the pan should correspond to that of the burner.
Do not use cookware that overlaps the edge of the burner.
Black circle: gas OFF.
Large flame: maximum setting.
Small flame: minimum setting.
The minimum setting is at the end of the anti-clockwise rotation of the
BURNERS
PANS
min
Max
