Parts Name And Functions; Control Panel; Terminal Panel - NEC LCD4000 Manual Del Usuario

Parts Name and Functions

Control Panel

1
POWER button ( )
Switches the power on/off. See also page 13.
2
MUTE button
Switches the audio mute ON/OFF.
3
INPUT button
Acts as SET button with OSM menu.
Selects the signal connected with the RGB input connector.
Toggle switches between [RGB1], [RGB2], [RGB3], [DVD/HD]
and [VIDEO].
4 PLUS button
Acts as (+) button to increase the adjustment with OSM menu.
Increases the audio output level when the OSM menu is turned off.

Terminal Panel

1
AC IN connector
Connects with the supplied power cord.
2
RGB 1 IN (DVI-D)
To input digital RGB signals from a computer having a digital RGB
output.
* This connector does not support analog input.
3
RGB 2 IN (mini D-Sub 15 pin)
To input analog RGB signals from a personal computer or other
RGB equipment.
01_English
buttons
3
5
MINUS button
Acts as (-) button to decrease the adjustment with OSM menu.
Decreases the audio output level when the OSM menu is turned off.
6
UP ( ) button
Activates the OSM menu when the OSM menu is turned-off.
Acts as button to move the highlighted area up to select the
adjustment with OSM menu.
7
DOWN ( ) button
Activates the OSM menu when the OSM menu is turned-off.
Acts as button to move the highlighted area down to select the
adjustment with OSM menu.
8
EXIT button
Activates the OSM menu when the OSM menu is turned-off.
Acts as EXIT button to move to previous menu with OSM menu.
9
Remote control sensor and Power Indicator
Receives the signal from the remote control (when using the
wireless remote control). See also page 5.
Glows green when the LCD monitor is in active, glows red when the
LCD monitor is in POWER OFF mode and glows green and red
when the LCD monitor is in POWER SAVE mode.
10
Main Power Switch
On/off switch to turn main power on and off.
11
Control Key Lock Mode
This control completely locks out access to all Control Key
functions. To activate the control key lock function, press both
of " " and " " and hold down simultaneously for more than
3 seconds. To resume back to user mode, press both of "
and " " and hold simultaneously for more than 3 seconds.
4
RGB 3 DVD/HD [R/Cr/Pr, G/Y, B/Cb/Pb, H, V] (BNC)
IN connector: To input analog RGB signals or signals from other
RGB equipment.
This is also to connect equipment such as a DVD player and HDTV
laser disk player. A Sync-on-Green signal can be connected to the
G/Y connector.
5
RGB OUT connector (BNC)
To output the signal from RGB 2 and 3.
6
AUDIO IN 1, 2, 3
To input audio signal from external equipment such as a computer,
VCR or DVD player.
7
AUDIO OUT
To output the audio signal from the AUDIO IN 3 jack.
8
VIDEO
VIDEO IN connector (BNC and RCA): To input a composite video
signal. BNC and RCA connectors are not available at the same
time. (Use only one input).
VIDEO OUT connector (BNC): To output the composite video
signal from the VIDEO IN connector.
S-VIDEO IN connector (DIN 4 pin): To input the S-video
(Y/C separate signal).
9
EXTERNAL CONTROL (mini D-Sub 9 pin)
IN connector: Use when operating the LCD monitor from the RGB
equipment like a computer.
10 EXTERNAL SPEAKER TERMINAL
To output the audio signal from AUDIO 1 or 2 or 3 jack.
English-3
20/01/2003, 15:41
"