Siemens SITRANS FCT030 Instrucciones De Manejo página 11

Using the menu structure
There are three view types:
● Operation view
The operator view shows up to six operation views. The operation views are fully configurable to show different process
values in different operation view types. Depending on the operation view type configuration the view is either
measurement view or alarm view.
– Measurement view: Displays the measurement values.
– Alarm view: Displays the active alarms in a list.
● Navigation view
The navigation view shows the menus and parameters. The navigation view is used to navigate to the menus and
parameters in the device.
● Parameter view
The parameter view can be entered form the navigation view. The parameter view is used to view and edit the
parameters.
Navigating the operation view
Browse the operation views and menu items using the control buttons as follows:
Table 5-1 Measurement view
Key Function
No functionality
Go to the previous menu in the operation view
Go to the next menu in the operation view
Enter the navigation view
Table 5-2 Alarm view level 1
Key Function
No functionality
Go to the previous menu in the operation view
Go to the next menu in the operation view
Enter alarm view level 2
Table 5-3 Alarm view level 2
Key Function
Enter alarm view level 1
Select the item above in the list; keep pressing the key to accelerate scrolling up the selection list
Select the item below in the list; keep pressing the key to accelerate scrolling down the selection list
Enter alarm view level 3
SITRANS FCT030 transmitter
A5E03650800-02, 03/2012
11