Angelo Po 0S0VT1IB Manual De Uso página 45

Plancha de induccion en vitroceramica
Idiomas disponibles
  • ES

Idiomas disponibles

USE AND OPERATION
INSTRUCTIONS AND WARNINGS FOR USE AND OPERATION
NOTE:
Carefully read the hazards
mentioned in section "Hazards and safety
provisions during use" on page 8.
ATTENTION: Besides being autho-
rised and appropriately documented, and if
necessary, instructed and trained, on fi rst us-
age, users shall simulate several operations
to identify the controls and main functions.
WARNING: Use only as intended by
the manufacturer and never tamper with
any device to obtain performance levels
outside the rated specifi cations.
ATTENTION: Before use, check that
the safety devices are properly installed and
in good working order.
ATTENTION: As well as taking care
to meet these requirements, users should
also implement all safety regulations and
read the description of the controls and the
start-up procedure carefully.
– The constant presence of the operator is re-
quired during routine use of the appliance.
– To avoid burns, do not touch the hob when
in use.
– Do not touch the internal components of the
induction module.
WARNING:
should seek medical advice to determine
whether they can safely use induction appli-
ances.
WARNING: The fl oor near the appli-
ance could be slippery.
WARNING: Do not obstruct the fl ue
to prevent the temperature of the combus-
tion components and products from increas-
ing excessively over the admissible limits.
WARNING: Never use cookware not
suitable for induction cooking processes.
3378781_ut_GB
USE AND OPERATION
Pacemaker
wearers
To ensure correct use of the appliance, the fol-
lowing rules should be adopted.
WARNING: Use only the accessories
recommended by the Manufacturer.
– Do not use the plate for cooking food directly
without any pans.
– Only use the appliance to heat pans.
– Always use gloves when handling cookware
to avoid the risk of burning.
IMPORTANT: Never place pans too
close together and make sure they do not
touch each other.
IMPORTANT: Place the bottom of
the pot at the centre of the inductor.
IMPORTANT: Make sure that it does
not touch the metal edge of the top.
ENGLISH
17
loading