Idiomas disponibles
Idiomas disponibles
ENGLISH
The position of the signs provided is shown in
the picture.
Manufacturer and appliance nameplate.
A)
WARNING: read the manual carefully
B)
before carrying out any procedure.
WARNING: when washing the appli-
C)
ance, do not point pressurised water jets at
internal parts.
WARNING: draws attention on com-
D)
pliance with the rules. "Install in compliance
with the applicable regulations and use in well
ventilated premises only".
WARNING: draws the attention on
E)
compliance with the rules. "The Manufacturer
declines all liability in case of failure to com-
ply with the installation and commissioning
instructions".
WARNING: watch out for hot surfaces.
F)
CE Marking: indicates that the equipment is
G)
compliant with all relevant laws applicable to
the product.
HAZARDS AND SAFETY PROVISIONS DURING TRANSPORT
During transport of the appliance, watch out for the following hazards and provide for the counter-
measures indicated below:
► Source of hazard: Handling of heavy loads
Hazard
Risk of injury due to
body overload
4
SAFETY AND INFORMATION SIGNS
Where or in which situations
does the hazard occur?
• When
the
appliance
moves
E
D
F
37M3202
C
B
L
3188670
WEEE symbol: indicates that the appliance is
H)
subject to specifi c waste disposal regulations.
WARNING:
L)
should seek medical advice to determine
whether they can safely use induction appli-
ances.
Countermeasures
• Use a suitable lifting
device
• Observe
the
values for lifting and
transport
• Wear personal protec-
tive equipment
SAFETY
A
H
Pacemaker
wearers
Safety device
• Protective gloves
• Protective shoes
• Safety helmet (e.g.
limit
for
suspended
loads,
overhead
operations...)
3378781_ut_GB
G
