Home Decorators Collection MAKENNA 56235 Guía De Uso Y Mantenimiento página 13

Assembly - Attaching the Accessories
Mounting the remote control holder
NOTE: Screw wall anchors are included for extra support. The
included screws are designed to screw easily into the wall. If
you would like a more permanent or secure hold, install the wall
anchors prior to attaching the wall cradle to the wall.
□
Slide the screw cover plate up to remove it from the wall
cradle.
□
Position the wall cradle in the desired position and attach it to
the wall using the included wall cradle screws.
□
Slide the screw cover plate back onto the wall cradle to
conceal the screws.
Operating - Your Fan and Remote Control
□
Remote Control - Your fan is equipped with a remote control to
operate the speed and lights of your new ceiling fan.
□
Speed setting for warm or cool weather depends on factors such
as the room size, ceiling height, number of fans and so on.
□
The fan is shipped from the factory with the reversing switch (YY)
positioned to circulate air downward. If airflow is desired in the
opposite direction, turn your fan off and wait for the blades to stop
turning, then slide the reversing switch (located on the fan motor
assembly (C)) to the opposite position, and turn the fan on again.
The fan blades will turn in the opposite direction and reverse
airflow.
Warm weather - (Forward) A downward airflow creates a cooling effect.
This allows you to set your air conditioner on a higher setting without
affecting your comfort.
Cool weather - (Reverse) An upward airflow moves warm air off of
the ceiling. This allows you to set your heating unit on a lower setting
without affecting your comfort.
Screw cover plate
13
Please contact 1-877-592-5233 for further assistance.
Warm weather
YY
Cool weather
HOMEDEPOT.COM/HUBSPACE