Home Decorators Collection MAKENNA 56235 Guía De Uso Y Mantenimiento página 10

Assembly - Attaching the Blades (continued)
3
Assembling the decorative frame
□
Attach the decorative frame (G) to the blade assembly by
aligning the two posts of the decorative frame with the two
holes in the blade. Secure the decorative frame to the blade
using the decorative frame screws (DD). Insert the decorative
frame screws (DD) through the two holes in the blade arm (D)
and screw them into the posts of the decorative frame (G).
Align the hole in the tab at the end of the decorative frame (G)
with the frame brace on the side edge of the blade arm (D) and
secure using a frame brace screw (EE). Make sure all screws
are completely tightened.
□
Repeat this process for the remaining decorative frame
pieces (G).
□
Once all of the decorative frame pieces are installed,
completely tighten all of the blade arm screws (CC) to secure
the blade assemblies to the fan.
Assembly - Attaching the Light Kit
1
Installing the light kit pan
□
Remove one screw (HH) from the black bracket below the fan
motor assembly (C), and loosen but do not remove the other
two screws.
□
Push the light kit pan (H) up to the fan motor assembly (C) so
that the two loosened screw heads fit into the keyhole slots.
Turn the light kit pan (H) clockwise.
□
Re-install the screw (HH) that was removed in the first step.
□
Make sure all the screws are firmly tightened.
H
10
DD
DD
EE
G
D
HH
C