Idiomas disponibles
Idiomas disponibles
20
Sentry Tube Heaters
Igniter
The tip of the igniter is exposed to a harsh environment
consisting of high temperatures and combustion
products. Periodic servicing is required.
A. REPLACEMENT
1. Remove the 4 bolts from the burner tube See Fig 14.
2. Remove the igniter screws from the burner plate. See
Fig 15.
FIG. 14
Owner's Manual • Sentry
FIG. 15
3. Pull the ignition cable's rubber boot from the igniter.
B. MAINTENANCE
1. Ensure the gap is 1/8 in. See Fig. 16.
2. Clean the electrode and ground rod using emery cloth.
3. Ensure the insulative base of the electrode is not cracked.
FIG. 16
ELECTRODE
GROUND ROD
GAP
(1/8 IN.)
