Step 4 - Level The Washer; Step 5 - Complete Installation - Haier HLP24E Manual Del Usuario

sTEP 4 - LEvEL THE WasHER

IMPoRTanT: Proper leveling of the washer will help reduce noise and vibration.
1. Place washer in its final location. Check that the water and drain lines are not
strained or pinched. Make sure that all four feet are firmly in contact with the
floor and that the washer rests solidly in position.
2. Using a carpenter's level, check to make sure the washer is level from side to
side and from front to back.
3. If the washer is not level, adjust the leveling feet. Turn clockwise to extend (raise
the washer) or counterclockwise to retract (lower the washer).
Raise

sTEP 5 - CoMPLETE InsTaLLaTIon

1. Plug the washer into a grounded 3 prong outlet.
2. Check that water faucet is turned on.
3. Dispose of/recycle all packaging materials.
4. Run a normal wash cycle using detergent to test and
clean the washer. See the "Operating Instructions"
section.
Lower
11