Ingersoll Rand R140-KL1 Manual Del Usuario página 30

Idiomas disponibles

Idiomas disponibles

EN
Product Safety Information
Intended Use:
This Battery Charger is designed for charging Ingersoll Rand batteries.
Only use Ingersoll Rand charger with IQ
create a risk of fire or may cause battery to burst when charging. Personal injury or property damage may result.
Charger is not user serviceable. Repair should only be carried out by an
Ingersoll Rand Authorized Service Center. User service may result in electric shock, fire and/or serious personal injury.
This is a class A product. In a residential, commercial or light industrial environment it may cause radio interference. This product
is not intended to be installed in a residential environment; in a commercial and light industrial environment with connection to the public
mains supply, the user may be required to take measures to reduce interference.
For additional information, refer to Battery Charger Safety Information Manual Form 10567832 and Battery Safety Information
Manual Form 10567840.
Manuals can be downloaded from www.ingersollrandproducts.com
Product Specifications
Model
Input
BC20
100-240V AC ~ 50/60Hz, 80W
Refer to Parts List for approved batteries and chargers.
Instructions for Charging Battery
Do not charge battery pack when temperature is below 32°F (0°C) or above 104°F (40°C).
Completely charge new battery packs before using.
Charging time is approximately 60 minutes.
Action
Plug charger into
Power On (Stand-By).
100-240V AC power
outlet.
Charging.
Insert battery pack
into charger and twist
Fuel gage will indicate state of charge.
clockwise.
Renew Cycle Recommended.
Renew Cycle Active.
Communications Failure.
Reinsert battery.
Initial Temperature.
Charging paused until battery has returned to safe
temperature.
Time Out.
Charge time exceeded. Battery may be defective.
In Cycle Temperature.
Charging paused until battery has returned to safe
temperature.
Over Voltage.
High voltage detected. Battery may be defective.
Over Current.
High current detected. Battery may be defective.
19.2V NiCd Battery Inserted
BC20 is not compatible with 19.2V NiCd batteries.
Remove battery pack.
Charge Completed.
Legend:
ä Flash l On m Off
EN-2
WARNING
Series 7.2-14.4V Ni-Cd and 7.2-19.2V Li-Ion batteries. Use of other batteries or chargers may
V
Output
7.2-21V DC, 3.0A
Condition
Battery
Type
Voltage
Number of Cells Rated Capacity
14.4V
Ni-Cd
7.2V
19.2V
Li-Ion
14.4V
7.2V
Charger Display
Green
Red
Blue
l
m
l
m
l
m
l
m
m
l
2 x ä
m
m
3 x ä
4 x ä
m
5 x ä
m
6 x ä
m
m
7 x ä
l
m
12
1.8 Ah
6
1.8 Ah
5
2.4 Ah
4
2.4 Ah
2
2.4 Ah
Alarm
Fuel Guage
(Sound)
-
m
mmmm
ämmm
-
m
Ê
ämmm
-
l
Ê
-
ä
mmmm
Low ♪
m
mmmm
Low ♪
m
mmmm
Low ♪
m
mmmm
Low ♪
m
mmmm
Low ♪
m
mmmm
Low ♪
m
mmmm
Low ♪
m
mmmm
High
m
llll
♪ ♪ ♪
445619400_ed2
loading