Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ENGLISH
Getting started
Turning on and image setup
Remove the lens cover (12). Turn the unit on with a short press of the ON button
•
(3).
•
Adjust the resolution of the icons on the display by rotating the diopter
adjustment ring on the eyepiece (2).
Select the desired calibration mode in the main menu: Manual (M), Semi-
•
automatic (SA) or Automatic (A).
Calibrate the image with a short press of the ON button (3) (when calibration
•
mode SA or M has been selected). Close the lens cap before manual
calibration.
Select the required operating mode (Forest, Rocks, Identification, User)
•
in the main menu. User mode allows you to configure and save custom
brightness and contrast settings, as well as one of three modes as a base.
•
Adjust the brightness, display contrast, and smooth digital zoom using the
Controller (6).
Turn the unit off with a long press of the ON button (3).
•
10
Micro-USB
connector
1
ENGLISH
9
Micro-USB
slot cap
Lens
11
Lens cap
12
Eyepiece diopter
adjustment ring
REC button
4
ZOOM button
5
Controller
6
Eyeshade
1
2
3
ON button
7
Battery
slot cap
Battery
APS2
8
Tabla de contenido
