1.
Prepare the Site
2-3/16" (5.6 cm) D.
Ø 2-3/16" (5,6 cm)
2-3/16" (5,6 cm) D.
1-3/16" (3 cm) D.
Ø 1-3/16" (3 cm)
1-3/16" (3 cm) D.
1-1/2"
(3.8 cm)
3-1/2"
(8.9 cm)
These surfaces to be
flush.
Ces surfaces doivent
être égales.
Estas superficies
deben quedar al ras.
Install the Framing
IMPORTANT! The diagram illustrates hole locations for a right side handle. Reverse
the holes for installations with a left side handle.
NOTE: The mixer valve requires special framing and support.
Construct the framing for the faucet installation. A suggested framing example is
illustrated.
Verify the constructed framing is level and will be parallel to the finished wall.
Adjust as needed.
Attach the Mixer Valve
Loosely attach the mixer valve to the framing with one or two wood screws (not
provided).
Using the flat portion of the mixer valve as a guide, level the mixer valve.
Fully tighten the wood screw(s).
Préparer le site
Installer le cadrage
IMPORTANT! Le diagramme illustre les emplacements des trous pour une poignée
sur le côté droit. Inverser les torus pour les installations avec une poignée sur le côté
gauche.
1141147-2-B
1-3/4"
(4.4 cm)
These surfaces to be
6" (15.2 cm)
flush.
Ces surfaces doivent
être égales.
Estas superficies
deben quedar al ras.
16" (40.6 cm)
4
Kohler Co.
