Tools/Outils/Herramientas
Pencil
Crayon
Lápiz
Propane Torch
Torche au propane
Soplete de propano
Plumbers Putty
Solder
Mastic de plombier
Fer à souder
Masilla de plomería
Suelda
#10 Wood Screws
Level
Vis à bois #10
Niveau à bulle
Tornillos para madera
Nivel
del #10
Before You Begin
CAUTION: Risk of property damage. Before finishing the wall, ensure the supply
lines are connected to the mixer valve with the cold supply line plumbed on the left
and the hot supply line plumbed on the right. Doing so will avoid replacing the
finished wall due to error.
IMPORTANT! Unless otherwise indicated, the diagrams in this document show the
installation for a handle located to the right of the spout. The valve is designed for
handle installation on the right side. Special steps will need to be performed to
position the handle to the left of the valve.
NOTICE: For exterior wall installations, be sure proper wall insulation is installed to
prevent frozen pipes.
Observe all local plumbing and building codes.
Shut off the main water supply.
Carefully inspect supply tubing for any sign of damage.
The supplied plaster guard will also be used to assemble the valve. The supplied
spout tool will also be used for alignment of the spout escutcheon.
Kohler Co. reserves the right to make revisions in the design of faucets without
notice, as specified in the Price Book.
1141147-2-B
Hex Wrenches
Tube Cutter
Clés hexagonales
Coupe-tubes
Llaves hexagonales
Cortatubos
1-3/16" and 2-3/16" Hole Saw
Scie circulaire de 1- 3/16" et 2-3/16"
Corona perforadora de 1-3/16" y 2-3/16"
Tape Measure
2x4 Lumber
Mètre ruban
Lambourde de 2x4
Cinta para medir
Listones de 2x4
2
Kohler Co.
