Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
SWIRLS ON THE FLOOR AFTER SCRUBBING
•
Floor not clean.
•
Incorrect solution.
•
Area not properly swept - debris in pad or brush.
•
Improper pad or brush for the job.
•
Moving the machine too fast.
SWIRLS ON THE FLOOR AFTER DRY BUFFING
•
Moving the machine too fast.
•
Floor fi nish too soft.
•
Area not properly swept - debris in pad or brush.
•
Improper pad or brush for the job.
CIRCLES ON THE FLOOR
•
Machine standing still while the brush or pad is running.
FLOOR FINISH REMOVED
•
Improper pad... too aggressive.
•
Solution too strong.
MACHINE WOBBLES DURING OPERATION
•
Defective pad... one side is more dense than the other.
•
Machine left sitting on brush or pad for extended period of time causing bristles or pad to "take a set".
•
Pad not "seated" properly into pad holder bristles.
•
Warped block on brush or pad holder - replace.
•
Wrong pad holder for application
MACHINE DOES NOT RUN
•
Check circuit breaker (13) on models 443H & D (only on models after serial number break)
•
Check plug for proper connection - on machine and at wall outlet.
•
Check building circuit breaker.
•
Call for service.
TECHNICAL SPECIFICATIONS (as installed and tested on the unit)
Model
Model Number
Electrical
Pad/Brush Speed
Pad/Brush Size
Total Weight (w/cord)
-Machines built after Serial Number Break
Sound Pressure Level (ISO 11201)
Vibrations at the Hand Controls (ISO 5349-1)
-Machines built before Serial Number Break
Sound Pressure Level (ISO 11201)
Vibrations at the Hand Controls (ISO 5349-1)
Protection Grade
Protection Class
Type
Aluminum
Electrical / motors / engines - misc
Ferrous metals
Harnesses / cables
Liquids
Plastic - non-recyclable
Plastic - recyclable
Polyethylene
Rubber
revised 8/2015
Spintec 443
56380065, 56380066, 56380073
1.1kW - 230V / 50/60Hz
167 rpm
17" (43 cm)
82 lbs (37.3 kg)
59dB LpA, 3KpA
0.42 m/s
59dB LpA, 3KpA
0.42 m/s
IPX4
Material Composition and Recyclability
% of machine weight
19%
55%
FORM NO. 56041822 - Spintec 443 / Spintec 443 H / Spintec 443 DS - 81
Spintec 443 H
56380068, 56380069, 56380074
1.5kW - 230V/50Hz
400 rpm
17" (43 cm)
87 lbs (39,5 kg)
69dB LpA, 3KpA
2
2.49 m/s
62dB LpA, 3KpA
0.65 m/s
2
IPX4
% recyclable
100%
86%
9%
100%
9%
43%
0%
0%
5%
0%
0%
0%
0%
0%
4%
0%
Spintec 443 DS
56380070, 56380071, 56380075
1.1kW / 1.5kW - 230V/50Hz
180 / 360 rpm
17" (43 cm)
88 lbs (40 kg)
70.1dB LpA, 3KpA / 70.8dB
LpA, 3KpA
2
2.5 m/s
2
/ 2.5 m/s
61dB LpA, 3KpA
0.29 m/s
/ 0.48 m/s
2
2
IPX4
2
2
