Idiomas disponibles
Idiomas disponibles
Definitions
1.
Cap
Secures the shaft in the drive tube
during transportation.
2.
Hand Guard
Limits usable grip area for left hand
in direction of gearbox and blades.
Helps protect hand from cuttings.
3.
Handle Hose
For holding and controlling the unit
with the hand during operation.
4.
Drive Tube
Encloses and protects the drive
shaft between the engine and
gearhead.
5.
Slide Control
For starting throttle, run and stop.
Keeps the throttle partially open
during starting, switches the
engine's ignition off to stop the
engine.
6.
Throttle Trigger Interlock
Must be depressed before the
throttle trigger can be activated.
7.
Throttle Trigger
Controls the speed of the engine.
HL 90 K
8.
Choke Knob
Operates choke to enrich the
mixture for easier engine starts.
9.
Spark Plug Boot
Connects the spark plug to the
ignition lead.
10. Air Filter Cover
Encloses and protects the air filter.
11. Fuel Tank
For fuel and oil mixture.
12. Machine Support
For resting machine on the ground.
13. Cutting Blades
Steel blades for cutting hedges and
shrubs.
14. Blade Scabbard
Covers and protects cutting blades
when hedge cutter is not in use.
15. Cutting Blade Guard
Helps to reduce the risk of operator
contact by the cutter blade.
English / USA
16. Blade Drive Gear
Converts rotary movement of angle
drive into reciprocating movement
of cutting blades.
17. Angle Drive
Transmits rotary movement of drive
shaft to the blade drive gear.
18. Fuel Filler Cap
For closing the fuel tank.
19. Carburetor Adjusting Screws
For tuning the carburetor.
20. Fuel Pump
Provides additional fuel feed for a
cold start.
21. Starter Grip
The grip of the pull starter, which is
the device to start the engine.
22. Muffler with Spark Arresting
Screen
Reduces exhaust noises and
diverts exhaust gases away from
operator.
33
