Stanley ProSert XTN20 Manual página 19

E N G L I S H
6. Hydraulic Oil General Safety Data
FIRST AID
SKIN:
Unlikely to cause harm to the skin on brief or occasional contact but prolonged or exposure may lead to
dermatitis. Wash skin thoroughly with soap and water as soon as reasonably practicable. Remove heavily con-
taminated clothing and wash underlying skin.
Launder contaminated clothing.
ORAL:
Unlikely to cause harm if accidentally swallowed in small doses, though larger quantities may cause nausea
and diarrhea.
If contamination of the mouth occurs, wash out thoroughly with water. Except as a deliberate act, the ingesti-
on of large amounts of product is unlikely. If it should occur, do not induce vomiting; obtain medical advice.
Take person to nearest medical centre.
EYES:
Unlikely to cause more than transient stinging or redness if accidental eye contact occurs.
Wash eyes thoroughly with copious quantities of water, ensuring eyelids are held open. Obtain medical advice
if any pain or redness develops or persists.
DISPOSAL:
Remove all spills with inert absorbent material. Ventilate spill area. Place contaminated materials in a disposa-
ble container and dispose in a manner consistent with local regulations.
PROTECTING THE ENVIRONMENT:
Separate collection. This product must not be disposed of with normal waste. Should you find one day that
your product needs replacement, or if it is of no further use to you, do not dispose of it with regular waste.
Make this product available for separate collection. Separate collection of used products and packaging
allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental
pollution and reduces the demand for raw materials. Local regulations may provide for separate collection
of electrical products, at municipal waste sites or by the retailer when you purchase a new product. You can
check the location of your nearest authorised repair agent by contacting your local STANLEY Engineered
Fastening office at the address indicated in this manual. Alternatively, a list of authorised repair agents and full
details of our after-sales service and contacts are available on the Internet at:
www.StanleyEngineeredFastening.com
C.O.S.H.H. data for all hydraulic oils and lubricants is available on request from your tool supplier.
FIRE:
FLASH POINT: 200°C.
Extinguish with dry, chemical, foam or carbon dioxide. Do not enter confined space without self contained
breathing apparatus.
HANDLING:
Use barrier cream or oil resistant gloves.
STORAGE:
Undercover and consistent with local regulations for inflammable material.
19