Hitachi SPX-WKT2 Manual Del Usuario página 7

4.5 FAN SPEED SELECT
1 Press "" or "" and select "SPEED".
4.6 AUTO SWING OPERATION
1 Press " " (START/STOP). Make sure that the operation
started.
Press "" or "" and select "SWING".
The display for models of vertical
and horizontal swing
The display for models of vertical
swing only
NOTE
• For the indoor unit without the auto swing operation, the
indication of "SWING" will not be displayed on LCD.
2 By pressing "" or "", the operation mode will be changed
as follows.
NOTE
• The fan speed of dehumidifying operation can select "LOW"
and "SILENT" only.
• The fan speed of fan operation cannot select "AUTO".
2 To start/cancel auto swing operation
• VERTICAL SWING
Press "". The deflector(s) will start to swing up and down.
Press "" again. The deflector(s) will stop in the current
position.
• HORIZONTAL SWING
Press "". The deflectors will start to swing right and left.
Press "" again. The deflectors will stop in the current
position.
NOTE
• During cooling and dehumidifying operation, do not keep the
deflectors swinging or in the lower position (in the case of
vertical auto swing) for a long time.
• It may cause dew condensation on the deflectors.
- 7 -
The display for models of vertical
and horizontal swing
The display for models of vertical
swing only