Hitachi SPX-WKT2 Manual Del Usuario página 11

5.4 WEEKLY TIMER OPERATION ("Functions" menu)
5.4.1 Weekly schedule setting
This function is used to start or stop the unit operation at the
setting time.
Temperature can be also set when the unit is operated.
Five different schedule timers (max.) can be set for each day
of the week.
1 Select "Weekly Timer" from the menu and press "OK".
2 Select "Day/Time Setting" by pressing "" or "" and
press "OK".
NOTE
• If the present time has not been set yet, automatically
"Adjusting Date/Time" will be displayed.
• In this case, " " is indicated on LCD of the normal mode.
• Refer to "Adjusting Date/Time" section of this manual.
• When "Sleep Timer" operation is set, this function cannot be set.
(" " will be displayed if the function is not available.)
3 Select the day of the week (from Monday to Sunday) by
pressing "" or "". Press "OK".
• " " (operation) and " " (stop) will be displayed on LCD.
4 Select the schedule No.(from 1 to 5) by pressing "" or "".
Select "ON Time", "OFF Time" or "Setting Temperature" by
pressing "" or "".
Set the ON/OFF timer and temperature by pressing "" or
"".
• Press or keep pressing "" or "" to adjust numbers.
• When "ON Time" or "OFF Time" is selected, the setting time
can be set every 1 minute by pressing "" or "".
Press and hold "" or "", the setting time will change
more quickly. (10 minutes acceleration)
• Five different schedule timers (max.) can be set for each day
of the week.
The figure shows that following timers are set for Monday;
ON Timer : 6:00
OFF Timer : 9:00
Setting Temperature: 25°C
5 Press "OK". The confirmation screen will be displayed.
6 Select "Yes" by pressing "" or "" and press "OK".
The setting will be confirmed and the screen will return to the
normal mode.
To set other days of the week, select "Set other day" and press
"OK".
NOTE
• The timer is controlled by this remote controller.
• The timer lamp of indoor unit does not turn on.
- 11 -
" " will be indicated when the
weekly timer operation is activated.