Hitachi SPX-WKT2 Manual Del Usuario página 9

5.2 SIMPLE TIMER OPERATION ("Functions" menu)
This function is used to start or stop the unit operation at the
setting time. The timer operation contents can be set from
"Once" to "Everyday".
1 Select "Simple Timer" from the menu and press "OK".
The simple timer setting will be displayed.
NOTE
• If the present time has not been set yet, automatically
"Adjusting Date/Time" will be displayed.
• In this case, " " is indicated on LCD of the normal mode.
• Refer to "Adjusting Date/Time" section of this manual.
• When "Sleep Timer" operation is set, this function cannot be set.
( " " will be displayed if the function is not available.)
2 Press "" or "" to select the setting items. The setting
items are displayed "Timer Op.", "ON Time" and "OFF Time".
3 Press "" or "" to set each setting content for the selected
item. When "Timer Op." is selected, the setting contents are
switched in order of "Not Used" <---> Once" <---> "Everyday"
by pressing "" or "". When "ON Time" or "OFF Time" is
selected, the setting time can be set every 10 minutes by
pressing "" or "".
Press and hold "" or "", the setting time will change more
quickly.
NOTE
• If "Once" of the timer operation setting is selected, the setting
content will be automatically changed to "Not Used" after
"Once" timer operation.
4 Press "OK" to finish the simple timer setting.
The confirmation screen will be displayed.
5 Select "Yes" by pressing "" or "" and press "OK".
The setting will be confirmed and the screen will return to
the normal mode.
NOTE
• The timer is controlled by this remote controller.
• The timer lamp of indoor unit does not turn on.
• During "Simple timer" operation, if "Leave Home"
operation is started, the setting will be automatically
changed to "Not Used".
- 9 -
" " will be indicated when the
timer operation is activated.