Hilti TE 70-ATC/AVR Manual De Instrucciones página 21

Trouble or fault
Drill bit is not re-
leased.
Product switches off
if drill bit jams.
Service indicator
flashes.
Service indicator
shows.
9 Disposal
Most of the materials from which Hilti tools and appliances are manu-
factured can be recycled. The materials must be correctly separated before
they can be recycled. In many countries, your old tools, machines or appli-
ances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti
representative for further information.
▶ Do not dispose of power tools, electronic equipment or batteries as
household waste!
10 Manufacturer's warranty
▶ Please contact your local Hilti representative if you have questions about
the warranty conditions.
Mode d'emploi original
1 Indications relatives au mode d'emploi
1.1 À propos de ce mode d'emploi
• Avant de mettre l'appareil en marche, lire impérativement ce mode
d'emploi. C'est la condition préalablement requise pour assurer la
sécurité du travail et un maniement sans perturbations.
*2244432*
Possible cause
Side handle not fitted
correctly.
The electronic safety
shut-down has tripped
to avoid further jam-
ming.
The product is faulty.
The carbon brushes are
worn.
2244432
Action to be taken
▶ Disengage the side
handle and refit it
correctly so that the
clamping band and
side handle engage in
the recess.
▶ Release the drill bit.
▶ Have the product
repaired by Hilti
Service.
▶ Have checked, and if
necessary replaced,
by a trained electrical
specialist.
Français 15