Hilti TE 70-ATC/AVR Manual De Instrucciones página 19

To help ensure safe and reliable operation, use only genuine Hilti spare
parts and consumables. Spare parts, consumables and accessories
approved by Hilti for use with the product can be found at your local
Hilti Store or online at: www.hilti.group.
6.1 Cleaning the dust shield
▶ Clean the dust shield on the chuck with a dry, clean cloth at regular
intervals.
▶ Clean the sealing lip by wiping it carefully and then grease it again lightly
with Hilti grease.
▶ It is essential that the dust shield is replaced if the sealing lip is damaged.
7 Transport and storage
• Do not transport electric tools with accessory tools fitted.
• Always unplug the supply cord before storing an electric tool or appliance.
• Store tools and appliances in a dry place where they cannot be accessed
by children or unauthorized persons.
• Check electric tools or appliances for damage after long periods of
transport or storage.
8 Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable
to remedy the problem by yourself, please contact Hilti Service.
8.1 Troubleshooting
Trouble or fault
Product does not
start.
*2244432*
Possible cause
Interruption in the elec-
tric supply.
The generator is in sleep
mode.
The electronic restart
interlock is activated
after an interruption in
the electric supply.
2244432
Action to be taken
▶ Plug in another electric
tool or appliance
and check whether it
works.
▶ Apply a load to
the generator by
connecting a second
power consumer (e.g.
worklight). After this,
switch the product off
and then on again.
▶ Switch the product off
and then on again.
English 13