Idiomas disponibles
Idiomas disponibles
Use only the following high-speed battery
charger to charge the cordless tool: PLG 20 A1*
INPUT:
Rated voltage:
Rated power
consumption:
Fuse (internal):
OUTPUT:
Rated voltage:
Rated current:
Charging time:
Protection class:
*BATTERY AND CHARGER ARE NOT INCLUDE
Noise emission value:
Noise measurement value determined in accord-
ance with EN 60745. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level: L
Uncertainty K:
Sound power level:
Uncertainty K:
Wear hearing protection!
Vibration emission value:
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 60745:
Sawing wood a
< 2,5 m/s
h,W
Uncertainty K = 1.5 m/s
NOTE
►
The vibration emission value and noise emis-
sion levels specified in these instructions have
been measured in accordance with the stand-
ardised testing procedure specified and can
be used to make equipment comparisons.
The specified vibration emission value and
the noise emission values can also be used to
make an initial load estimate.
PHKSA 20-Li A1
230–240 V ~ , 50 Hz
(AC)
65 W
T3.15A
3.15 A
21,5 V
(DC)
2.4 A
approx. 60 min
II / (double insulation)
= 77 dB(A)
PA
K
= 3 dB
PA
L
= 88 dB (A)
WA
K
= 3 dB
WA
2
2
WARNING!
►
Depending on the manner in which the
power tool is being used and, in particular,
the kind of workpiece that is being worked,
the vibration and noise emission values can
deviate and may sometimes exceed the val-
ues given in these instructions. Regular use of
the power tool in this way may cause the user
to underestimate the vibration. Try to keep the
vibration loads as low as possible. Measures
to reduce the vibration load are, e.g. wearing
gloves and limiting the working time. Wherein
all states of operation must be included (e.g.
times when the power tool is switched off and
times where the power tool is switched on but
running without load).
General Power Tool
Safety Warnings
WARNING!
►
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flam-
mable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
│
GB
19
■
