Idiomas disponibles
Idiomas disponibles
ADDITIONAL SAFETY RULES FOR THE LASER
SAFETY INSTRUCTIONS - LASERS
Laser radiation, avoid direct eye exposure, serious eye
injury can result.
• Do not use optical tools such as a telescope or transit
to view the laser beam.
• Position the laser so unintentional eye contact will be
avoided.
• Do not operate the laser around children or allow
children to operate the laser / power tool.
• Do not disassemble. Modifying the product in any
way can increase the risk of laser radiation.
Use of controls or adjustments or performance of
procedures other than those specified in this manual
may result in hazardous laser radiation exposure.
• Do not operate in explosive atmospheres, such as in
the presence of flammable liquids, gases, or dust.
• Store idle product out of reach of children and other
untrained persons. Lasers / power tools are
dangerous in the hands of untrained users.
• Use only accessories that are recommended by the
manufacturer for your model. Accessories that may
be suitable for one laser / power tool, may create a
risk of injury when used on another laser / power tool.
• Repairs and servicing MUST be performed by a
qualified repair facility. Repairs performed by
unqualified personnel could result in serious injury.
• Do not remove or deface warning labels. Removing
labels increases the risk of exposure to radiation.
• For indoor use only.
• This product is intended for use in a temperature
range of 41°F(5°C) - 104°F(40°C).
WARNING
!
LASER RADIATION. AVOID DIRECT EYE EXPOSURE.
Do not stare into the laser light source. Never aim light
at another person or object other than the work piece.
Laser light can damage your eyes.
WARNING
!
LASER RADIATION. Never aim the beam at a work
piece with a reflective surface. Bright shiny reflective
sheet steel or similar reflective surfaces are not
recommended for laser use. Reflective surfaces could
direct the beam back toward the operator.
WARNING
!
DO NOT use tinted glasses to enhance the laser
light. Tinted glasses will reduce overall vision for the
application and interfere with the normal operation of the
tool.
6
