Porter Cable PCB660DP Manual De Instrucciones página 20

Idiomas disponibles

Idiomas disponibles

WARNING
!
For your own safety, turn the switch off and remove the
plug from the power source outlet before maintaining or
lubricating your drill press.
GENERAL MAINTENANCE
Frequently blow out dust and grit that accumulates in
the motor housing using compressed air.
WARNING
!
ALWAYS use safety glasses. Everyday eyeglasses
are NOT safety glasses. Also use face or dust mask if
cutting operation is dusty. ALWAYS WEAR CERTIFIED
SAFETY EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NIOSH/OSHA/MSHA respiratory protection.
A coat of automotive paste wax applied to the table and
column will help to keep the surface clean.
ACCESSORIES AND ATTACHMENTS
AVAILABLE ACCESSORIES
WARNING
!
Since accessories, other than those offered by Porter-
Cable, have not been tested with this product, use of
such accessories with this tool could be hazardous.
To reduce the risk of injury, only Porter-Cable
recommended accessories should be used with this
product.
A complete line of accessories is available from your
Porter-Cable Factory Service Center or a Porter-Cable
Authorized Warranty Service Center. Please visit our
Web Site www.portercable.com for a catalog or for the
name of your nearest supplier.
MAINTENANCE
To avoid shock or fire hazard, if the power lead is worn
or cut in any way, replace it immediately.
LUBRICATION
Ball bearings in the drill press are packed with grease at
the factory and require no further lubrication.
Use only mild soap and a damp cloth to clean the tool.
Never let any liquid get inside the tool; never immerse
any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(other than those listed in this manual) should be
performed by authorized service centers or other
qualified service organizations, always using identical
replacement parts.
Do not use any accessory unless you have completely
read the Instruction Manual for that accessory.
20
WARNING
!
WARNING
!
loading