Idiomas disponibles
Idiomas disponibles
Diamond Cutting Wheels
Type 1/41/Type A
guard
N039610 7"**
NA216780 9"
Diamond cutting
wheel
Locking flange
NA290954
sanding Discs
Rubber backing pad
DAJHXKMDO1**
DAJHXKHDO1**
Sanding disc
Sanding clamp nut
(Included with
rubber backing pad
DAJHXKMDO1** or
DAJHXKHDO1**)
Type 11 Flaring Cup Wheels
Type 11 / Type D
Flaring cup guard
D284934 4"**
D284936 6"**
Flaring cup stone
hubbed Wheel Wrench
Hubbed wheel wrench
N541784**
Spanner wrench
NA252487
Type 1/41/Type A guards are intended for use
with Type 1/41 cutting wheels and Type 27 wheels
marked for cutting only. Grinding with wheels other
than Type 27 and Type 29 require different accessory
guards. Always use the smallest proper guard
possible that does not contact the accessory.
** nOTE: Available at extra cost from your local dealer or
authorized service center.
*** nOTE: These can be used with only the Type A guard,
N039610 7"**, NA216780 9".
† nOTE: Type 28 depressed center wheels only.
shrouds
Surfacing Shroud DWE46172 7"**
Surfacing Shroud with Door
DWE46170 7"**
English
19
