Checking The Pump Oil; Checking The Nozzle - Jacto PJM-20 Manual Del Operador

c. Tighten the locknut.
d. Check if the throttle lever is working perfectly.
e. Reinstall the air filter cap.

7.6. Checking the pump oil

To check the pump oil quality and level, follow the steps below:
1. Remove the cushion
2. Check if the pump oil is contaminated or has a milky appearance.
3. Check if the oil level is below the average level on the oil inspection window. If any of these situations are noticed, contact your
authorized technical assistance.

7.7. Checking the nozzle

Check if the spray nozzle is spraying continuously. In case it is not, take the nozzle apart and clean it. To clean it, follow the steps below:
• Clean the nozzle to remove any dirt or clogging.
• Replace the nozzle if it is damaged.
Reduce
gap
Adjusting nut
Pump oil
inspection
window
Average level
GAP:
0.5-2.5 mm
Locknut
Increase
gap
103/127