1. Introduction
This equipment was designed for spraying plants protection products approved
by regulatory authorities to be used in knapsack sprayers.
2. Specifications
Model
Net weight
Spray lance length
Hose length
Dimensions (LxWxH)
Chemical tank
Capacity
Filling opening diameter
Material
Pump
Type
Maximum pressure
Nozzle installed
Material
SAFETY GUIDELINES – DEFINITIONS
It is important for you to read and understand this manual. The information it
contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The
symbols below are used to help you recognize this information.
DANGER!
Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING!
Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION!
Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
Notice: Used without the safety alert symbol indicates a potentially hazardous
situation which, if not avoided, may result in property damage.
3. Preparing the Product For Use
3.1. Unpacking
Accessories plastic bag
8/19
PJH
5.0 kg
600 mm
1350 mm
406 x 206 x 565 mm
20 L
140 mm
Polyethylene
Piston - dual cup
100 psi (6.8 bar)
Blue adjustable cone
Brass
Tank
Hose with trigger
valve
Lance
Lever
Rod
CAUTION!
Be careful when taking out the sprayer out of the carton
because the lever is loose and can cause damage or
personal injury. Note that the agitator is loose inside the
tank and must be properly assembly.
3.2. Instaling the agitator
(A)
Mexedor
3.3. Installing the lever on the shaft and the rod on the
chamber top
Grease slighty the lever orifice and instal it on the rod. Fit a flat washer before the
locked ring.
Rod
Lever
Washers
locked
ring
3.4. Attaching the lance to the trigger valve
Elbow
Lance
Trigger
valve
WARNING!
Do not overtighten the screw cap.
(B)
Shaft
Trigger valve
Lock
Hose