Tightening The Harness; Loosening The Harness; Sprayer Pre-Use Inspection; Checking The Engine Oil Level - Jacto PJM-20 Manual Del Operador

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

6.3. Tightening the harness

Hold the middle harness buckle firmly. With the other hand, pull the strap downwards.

6.4. Loosening the harness

Hold the middle harness buckle firmly. With the other hand, pull the strap backwards.
CAUTION!
Before putting the sprayer on your back, make sure the harness straps are not stuck in the throttle lever.

7. Sprayer pre-use inspection

Before using the sprayer, it is very important to carry out the pre-use inspection to prevent possible injuries to the operator, damages
to the sprayer and the environment.
So, every time before using the sprayer, always check for agrochemical, oil or gasoline leaks under the engine and all over the sprayer.
NOTE: In case there is any leak, check the troubleshooting item or contact specialized technical assistance to have it repaired imme-
diately.

7.1. Checking the engine oil level

WARNING!
• Before carrying out any pre-use inspection, make sure the engine is OFF to prevent it from starting
by accident.
• Carry out the pre-use inspection on a level surface.
Check the engine oil level at every 10 hours of use and add more oil until the maximum fill line if the engine is used continuously for
long periods.
CAUTION!
The engine oil affects directly the performance and the useful life of the engine. We do not recommend using
vegetable oil or non-detergent oil.
Before checking the engine oil level, make sure to turn off the engine and park the sprayer on level ground.
Follow these steps:
Strap
Buckle
99/127
Tabla de contenido

Solución de problemas

loading

Tabla de contenido