Recommended Oil; Checking The Fuel Level - Jacto PJM-20 Manual Del Operador

a. Remove the oil tank filler cap;
b. Check the oil level. If it is below the maximum fill line, add recommended oil until the maximum fill line (overflowing);
c. Put the oil tank filler cap back.
NOTE: To prevent the oil from overflowing, add it slowly and carefully as the tank capacity is small. After adding oil, check if the cap is
well placed before restarting the engine.
CAUTION!
Do not use the engine with insufficient oil. It may damage the engine seriously.

7.2. Recommended oil

Use an oil for 4-stroke engine that meets or exceeds the SE classification standards of the API service or higher (or equivalent). Always
read the API service label on oil bottles to make sure they include the SE rating or higher (or equivalent).
SAE 10W-30 is recommended for general use.
CAUTION!
Using a non-detergent oil or oil for 2-stroke engine may shorten the engine useful life.

7.3. Checking the fuel level

Use unleaded octane 91 or higher automotive gasoline (86 octane at the pump or higher).
Never use over 30-day-of-use or contaminated gasoline nor a mixture of gasoline/oil.
Avoid letting dirt or water accumulate in the fuel tank. In case it accumulates, clean it immediately.
100/127
Oil filler cap
Room temperatue
Maximum fill line