Force Adjustment - Dea TEO 700 Instrucciones De Uso

5

Force adjustment

1. Press and hold the key until the display shows P1;
2. Scroll down the parameters with
splay shows P2;
3. Confirm by pressing the
4. Pressing the / keys, set the desired value;
5. Confirm by pressing the
6. After completing this operation the display shows "--".
Warning: After adjustments, check the force set on the door to
secure the installation.
6
Photocells
1. Press and hold the key until the display shows P1;
2. Scroll down the parameters with
splay shows P3;
3. Confirm by pressing the
4. Pressing the / keys, set:
- H0=photocells deactivated;
- H1=photocells activated;
5. Confirm by pressing the
6. After completing this operation the display shows "--".
Warning: If photocells are not used, set P3=H0.
7
Automatic closing
1. Press and hold the key until the display shows P1;
2. Scroll down the parameters with
splay shows P4;
3. Confirm by pressing the
4. Pressing the / keys, set the desired value;
Each increment of the parameter value, increases of 1 minute
the delay in closing up to a maximum of 9 minutes.
5. Confirm by pressing the
6. After completing this operation the display shows "--".
Warning: The default value is P4=b0 (deactivated). If this
function is active, it starts once the door opening position is
reached.
/ keys until the di-
key;
key;
/ keys until the di-
key;
key;
/ keys until the di-
key;
key;
13