Dea TEO 700 Instrucciones De Uso página 14

6 PROGRAMMING
1
Power Supply
Turn on the power supply, the courtesy light flashes for a few seconds and the display shows numbers "
standby symbol "--".
2
Motor stroke learning
1. Press on the
shows P1;
2. Confirm by pressing the
3. When " " is shown, press the keys
so the door opens ("
Confirm the opening position by pressing
the key;
4. When " ", appears, press the keys
so the door closes ("
Confirm the closing position by pressing the
key;
5. The door automatically opens and closes
looking for the opening/closing positions;
6. The display will show "--", programming
complete.
3
Deletion of memorized transmitters
1. Press and hold the
until you see " " on the display;
All remotes previously memorized will be deleted;
Warning: After 20 memorized codes (upper limit), the display
shows " ".
4
Transmitters learning
1. Press and hold the
2. Press the remote key you want to learn, then release it and
press a second time (the display shows "
3. The display will show "--", learning complete;
4. Repeat this procedure to learn other remotes up to a maximum
of 20 codes;
Warning: After 20 memorized codes (upper limit), the display
shows " ".
12
key until the display
key;
/
" flashes);
/
" flashes);
key (display shows " ") for 8 sec.
key until the display shows "
" flashing);
";
" to " " followed by the