Parkside 20 V 2,4 A Traduccion Del Manual De Instrucciones Originale página 22

GB IE
protection regulations and
information.
Checking the charge
status of the rechargeable
battery
The battery charge status indi-
cator (3) signalises the state of
charge of the battery (4).
Press the button (2) on the bat-
tery. The state of charge of the
battery is displayed by illumi-
nating the 3-colour LED lights of
the state of charge display.
3 LEDs light up
(red, orange and green):
Battery is fully charged.
2 LEDs light up (red and orange):
Battery has a residual charge.
1 LED lights up (red):
Battery has to be charged
Only charge the battery
(4) when the red LED on
the charge status indicator
(3) is on.
22
Recharging the battery
Allow a hot battery to cool
before charging.
Only charge the battery
(4) when the red LED on
the charge status indicator
is on.
1. Remove the battery (4) from
the appliance, as necessary
(see „Removing/inserting the
battery").
2. Insert the battery (4) in the
charging compartment of the
battery charger (5).
3. Plug the battery charger (5)
into a mains outlet.
4. Once charging is complete,
disconnect the charger (5)
from the mains supply.
5. Remove the battery (4) from
the charger (5).