ESAB EM 215ic Instrucciones De Uso página 12
Ocultar thumbs
Ver también para EM 215ic:
- Instrucciones de uso (46 páginas) ,
- Instrucciones de uso (56 páginas)
Idiomas disponibles
Idiomas disponibles
2 INTRODUCTION
Exclusive to ESAB, sMIG provides users with excellent short circuit transfer arc
characteristics.
The EM, EMS and EMP family connects to 120 V – 230 V, 1 ~ 50/60 Hz input power
supplies, supplied by mains or generator power. Incorporating a PFC (Power Factor
Correction) circuit significantly increases power efficiency.
Key features:
•
Excellent MIG/Stick characteristics
•
Excellent multi-process welding capabilities (MIG/Stick (EMS series), MIG/Stick and
Lift/TIG (EMP series))
•
Automatic recognition of input power with PFC (120 V – 230 V)
•
Large 4.3 in. (11 cm) high resolution customizable user interface (EMS and EMP only)
•
Rugged case design and internal hardware
•
Portable
•
High grade cast aluminum wire drive system provides excellent control of drive roll
geometry ensuring smooth, precise wire feeding
•
Professional high grade accessories
2.1
Equipment
Package consists of the following:
EMP series
•
ESAB EMP 215ic power source
•
Tweco Fusion™ 180 A MIG torch with 10 ft (3 m) cable / Tweco® pigtail with 0.023 in.
(0.6 mm), 0.030 in. (0.8 mm), 0.035 in. (0.9 mm) contact tip and Operator manual all
in one bag
•
Tweco® 17V TIG torch 12.5 ft (3.8 m), 8 pin and accessory kit
•
Victor® GF-250-50-580 argon flow-gauge regulator
•
Gas hose, 6.5 ft (2 m) Male 5/8-18UNF
•
Tweco® 200 A electrode holder & lead assembly, 13 ft (4 m), 50 mm dinse
•
Tweco® 200 A ground clamp & lead assembly, 10 ft (3 m), 50 mm dinse
•
1 bag of 4 general purpose stick electrodes (E6013, 1/8 in.),
•
ER70S-6, 0.030 in., 2 lb, 4 in. (100 mm) bobbin
•
Drive roll, 0.023 in./0.030 in. (0.6/0.8 mm) V-groove for mild steel and stainless wires
(installed on drive system)
•
Drive roll, 0.023 in./0.035 in. (0.6/0.9 mm) V-groove for mild steel and stainless wires
•
Drive roll, 0.030 in./0.035 in. (0.8/0.9 mm) V-knurled for flux cored wires
•
Thickness gauge tool
•
Power adapter (230 V – 120 V, 15 A)
•
Safety manual
•
CD (contains instruction manual - English/French/Spanish, and optional accessory
product data sheets)
•
Welding chart (French) Milar
•
Quick start guide
0463 407 001
- 12 -
© ESAB AB 2017
