Idiomas disponibles
Idiomas disponibles
Safety
2.7
Accident prevention
•
The workplace has to be covered for unauthorized persons, especially children.
•
Caution at thunderstorm - danger of lightning!
Depending on the intensity of the thunderstorm, stop working with the device if necessary.
•
The workplace must be sufficiently illuminated.
•
Be careful with wet, frozen, iced and dirty building materials! There is a danger of the
gripping material slipping out. → DANGER OF ACCIDENT!
2.8
Function Control
2.8.1 General
•
Before every usage of the device check the functions and the working condition.
•
Maintenance and lubrication are only permitted when device is shut down!
•
Do not use the device, until all faults which can cause safety hazards are removed.
•
If there are any cracks, splits or damaged parts on any parts of the device, immediately stop using
it.
•
The operating instructions must be available at the workplace every time.
•
Do not remove the type plate of the machine.
•
Unrecognisable information signs (such as regulatory or prohibition signs) must be replaced.
2.8.2 Hydraulic
Check all hydraulic hoses and connection for tightness before every operation. Only experts are
allowed to replace faulty parts (depressurized).
Ensure a clean working environment before opening the hydraulic connection.
The hydraulic hoses must be free of breaks and abrasion. Take care that there are no outstanding
edges, where the hoses could hook in.
The operator of the device is responsible for a constant line pressure, which is necessary for
the working with this device.
Only under these conditions is a safety gripping, lifting and transporting of the gripping goods
with this device ensured.
51400035
7 / 35
GB
