Idiomas disponibles
Idiomas disponibles
Caution
• When inserting the test strip, do not touch the bottom side of the test strip (inlet position) with your hand to avoid contamination.
• Please complete the blood sample siphoning within 2 minutes after inserting the test strip. The meter will automatically shut down if
there is no operation within 2 minutes.
• When using fresh capillary whole blood from the fingertip, the first drop of blood should be wiped away, and the second drop of whole
blood sample should be used for the test.
• If the blood sample is too small to fill the reaction zone, take a new test strip and perform the test again.
• The test strip should not be removed from the meter during the testing process.
• If the blood is filled and the hourglass icon never starts flashing, please use a new test strip and test again.
• If no status is selected, the result is marked as "FBG" by default.
• The meter displays blood glucose/blood lactate results in mmol/L. The measurement units are preset and cannot be changed.
• After you leave the results screen or after the status is confirmed, the results are stored in the log, and the status can no longer be
modified or deleted.
Blood glucose or blood lactate test results
Abnormal test results
When the test results do not match with your self-estimated concentration values, it is recommended that you perform a quality control
test (see Quality Control Testing for details) and then repeat the test once using a new test strip.
www.laktate.com | 49
