Wheel Removal - Honda ANF125 2010 Manual Del Propietário

WHEEL REMOVAL

Refer to the Safety Precautions on page
Front Wheel Removal
1. Raise the front wheel off the ground by
placing a support block under the engine.
2. Remove the front axle nut cap ( ).
3. Remove the front axle nut ( ).
4. Remove the front axle shaft (3), side
collars and the wheel.
Do not depress the brake lever when the
wheel is off the motorcycle. The caliper
pistons will be forced out of the cylinders
with subsequent loss of brake fluid. If this
occurs, servicing of the brake system will be
necessary. See your Honda dealer for this
service.
63 .
1
2
(1) Front axle nut cap
(2) Front axle nut
(3) Front axle shaft
http://mototh.com
(3) (1) (2)
89