Wheel Removal - Honda NT700V Manual Del Propietário

WHEEL REMOVAL

Refer to the safety precautions on page
86.
Front Wheel Removal
1. Park your motorcycle on a firm, level
surface.
2. Raise the front wheel off the ground by
placing a support block under the
engine.
3. Remove the left and right brake caliper
fixing bolts (1) and the left and right
brake calipers (2).
• When removing the brake caliper, be
carefull not to damage the sensor
and pulser ring. (NT700VA)
To avoid damage to the brake hose,
support the caliper assembly so that it
doesn't hang from the hose. Do not twist
the brake hose.
E
(1) Brake caliper fixing bolts
(2) Brake caliper
107