Closing the cap
:
Insert the cap in the opening – with
the grip upright – the marks must
line up.
:
Turn cap clockwise as far as stop
(about a quarter turn).
:
Fold the grip down so that it is flush
with the top of the cap.
If the grip does not lie completely flush
with the cap and the lug on the grip does
not engage the recess in the filler neck
(arrow), the cap is not properly seated
and tightened and you must repeat the
above steps.
HS 86 R, HS 86 T
Change the fuel pickup body
once every year
:
Drain the fuel tank.
:
Use a hook to pull the fuel pickup
body out of the tank and take it off
the hose.
:
Push the new pickup body into the
hose.
:
Place the pickup body in the tank.
English / USA
Starting / Stopping
the Engine
Starting the engine
Observe safety precautions – see
chapter on "Safety Precautions and
Working Techniques".
:
Press down the interlock lever (1)
and squeeze the throttle trigger (2) –
hold them in that position.
:
Move the slide control (3) to START
and hold it that position.
:
Let go of the throttle trigger, slide
control and interlock lever in that
order. This is the starting throttle
position.
15