DeWalt DCH263DH Manual Del Usuario página 28

EnGLIsH
HEAVY-DUTY CORDLESS ROTARY HAMMERDRILL
DCH263
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
No-load speed
No-load Impact rate
Single impact energy (EPTA 05/2009)
Maximum drilling range in steel/wood/concrete
Maximum core drilling capacity in soft brick
Chuck
Collar diameter
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN60745-2-6:
Hammerdrill mode
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Chisel mode
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Drilling into concrete
Vibration emission value a =
h, HD
Uncertainty K =
Chiselling
Vibration emission value a =
h ,Cheq
Uncertainty K =
Drilling into metal
Vibration emission value a =
h , D
Uncertainty K =
Screwdriving
Vibration emission value a =
h
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
26

WALT one of the
e
DCH263
V 18
DC
1
Li-Ion
min 0–1165
-1
bpm 0–4300
J 3.0
mm 13/30/28
EC-Declaration of Conformity
mm 65
Machinery Directive
SDS PLUS
mm 54
kg 2.7
Heavy-Duty Cordless Rotary Hammerdrill
DCH263
D WALT declares that these products described under
e
dB(A) 86
Technical Data are in compliance with:
dB(A) 97
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-6:2010.
dB(A) 3
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
dB(A) 89
The undersigned is responsible for compilation of the technical
dB(A) 100
file and makes this declaration on behalf of D
dB(A) 3
m/s² 9.1
m/s² 1.5
Markus Rompel
Vice-President Engineering, PTE-Europa
D WALT, Richard-Klinger-Straße 11,
e
m/s² 7.7
D-65510, Idstein, Germany
m/s² 1.5
07.01.2019
m/s² <2.5
m/s² 1.5
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
m/s² <2.5
signal word. Please read the manual and pay attention to
m/s² 1.5
these symbols.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WALT at
e
WALT.
e