Hilti Nuron DSH 700-22 Manual De Instrucciones Original página 36

Storage temperature
Battery charging starting temperature
4.4 Sound emission (in accordance with international standard)
Sound emission in accordance with EN ISO 3744
(L )
wa
4.5 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure. The data given represents the main applications of the power tool.
However, if the power tool is used for different applications, with different accessory tools, or is poorly
maintained, the data can vary. This can significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the
total working period. Identify additional safety measures to protect the operator from the effects of noise
and/or vibration, for example: Maintaining the power tool and accessory tools, keeping the hands warm,
organization of work patterns.
Noise emission values in accordance with EN 60745-1:2009 and EN 60745-2-22:2011
Sound pressure level (L
Sound power level (L
wa
Uncertainty
Total vibration values in accordance with EN 60745-1:2009 and EN 60745-2-22:2011
Vibration value (a )
hv,eq
Uncertainty (K)
5 Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
DSH 700-22
Unless otherwise stated, the descriptions below are applicable for DSH 600-22 and DSH 700-22.
5.1 Charging the battery
1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3. Use an approved charger to charge the battery. → page 27
5.2 Inserting the battery
WARNING
Risk of injury by short circuit or falling battery!
▶ Before inserting the battery, make sure that the contacts on the battery and the contacts on the product
are free of foreign matter.
▶ Make sure that the battery always engages correctly.
30 English
)
pa,eq
)
B 22­170
B 22­255
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
DSH 600-22
107 dB(A)
DSH 600-22
108 dB(A)
119 dB(A)
3 dB(A)
DSH 600-22
1.5 m/s²
1.2 m/s²
1.5 m/s²
2284136
*2284136*
DSH 700-22
107 dB(A)
DSH 700-22
107 dB(A)
118 dB(A)
3 dB(A)
DSH 700-22
1.4 m/s²
1.6 m/s²
1.5 m/s²