Idiomas disponibles
Idiomas disponibles
ENGLISH
Gauntlets made from a suitable material (leather)
must be worn on both hands. These must not be
30
damaged.
Suitable aprons must be worn to protect the clothing
against flying sparks and burns. If the nature of the
work, e.g. overhead welding, requires this, a protec-
tive suit must worn and, where necessary, this must
also include suitable head protection.
The protective clothing which is used, as well as all
the accessories, must be compliant with the "Personal
Protective Equipment" Regulation (2016/425).
Class A (IEC 60974-10):
If you intend to use the apparatus in residential sur-
roundings supplied by the low voltage mains supply,
an electromagnetic filter may be required to suppress
electrical disturbance to a level where they will no
longer be a nuisance to the user.
The apparatus may be used in industrial or other
areas where power is not supplied by municipal LV
mains.
Class A apparatus are not intended for use in resi-
dential areas where power is supplied via municipal
LV mains, since unfavourable power conditions may
cause interference.
As a user, you must make sure, after consultation with
your energy provider, if necessary, that your point of
connection on which the machine is to be operated
meets the requirements above.
The user is responsible for faults arising from the
welding.
SYMBOLS
Read the operating instructions to reduce
the risk of injury.
Ground before use
Warning / Caution!
Warning against dangerous voltage
Use a welding mask!
Special welding gloves to be worn at all
times.
370V
Class H
Artikelnummer: 20063
Baujahr: 2017
Seriennummer:
GÜDE GmbH & Co. KG·Birkichstr.6 ·74549 Wolpertshausen·www.guede.com
Wear safety cut through resistant shoes
with safety sole and steel toe !
Protective apron to be used
Unplug the machine before any work
on it.
The appliance must be stored in a dry place and
protected from frost.
Keep the machine out of reach of children.
Keep dry at all times. Never expose tool
to rain.
~
~
1
1
Single-phase transformer
Single-phase alternating current with
GPS 40A
rated frequency of 50 ~ 60 Hz
V
Voltage
AC Current
10A/84V
40A/26V
No gas
40A
25.8A
20A
96V
90.3V
88V
Wire feeder
30A
15A
Fan
Suitable for welding with an increased
electric risk.
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
CE marking
