Tabla De Contenido; What Is What On The Chain Saw; Contents - Husqvarna CS 340 ES Manual De Instrucciones

What is what on the chain saw?

(1)
1 Cylinder cover
2 Air purge
3 Stop switch (Ignition on/off switch.)
4 Choke control/Start throttle lock
5 Rear handle with right hand guard
6 Information and warning decal
7 Fuel tank
8 Adjuster screws carburettor
9 Starter handle
10 Starter
11 Chain oil tank
12 Product and serial number plate
13 Chain tensioning screw (CS 340)
14 Clutch cover (CS 340)
15 Throttle lockout (Prevents accidental operation of
throttle trigger.)
16 Front handle
17 Front hand guard
18 Muffler
19 Guide bar
20 Bar tip sprocket
21 Saw chain
22 Spike bumper (Available as an accessory.)
23 Knob (CS 380)
24 Chain catcher
25 Chain tensioner wheel (CS 380)
26 Clutch cover
27 Integrated combi-tool
28 Throttle trigger
29 Guide bar cover
30 Operator's manual
31 Combi-tool
1153988-26 Rev.4 2014-04-15

CONTENTS

Contents
INTRODUCTION
Dear Customer, .................................................... 6
Symbols on the machine: ..................................... 6
What is what on the chain saw? ........................... 7
CONTENTS
Contents ............................................................... 7
GENERAL SAFETY PRECAUTIONS
Before using a new chain saw .............................. 8
Important .............................................................. 8
Always use common sense .................................. 8
Personal protective equipment ............................. 9
Machine's safety equipment ................................. 9
Cutting equipment ................................................ 11
ASSEMBLY
Fitting the bar and chain ....................................... 14
FUEL HANDLING
Fuel ....................................................................... 15
Fueling .................................................................. 15
Fuel safety ............................................................ 16
STARTING AND STOPPING
Starting and stopping ........................................... 17
WORKING TECHNIQUES
Before use: ............................................................ 18
General working instructions ................................ 18
How to avoid kickback .......................................... 21
MAINTENANCE
General ................................................................. 22
Carburettor adjustment ......................................... 22
Checking, maintaining and servicing chain saw
safety equipment .................................................. 22
Muffler ................................................................... 23
Air filter ................................................................. 23
Spark plug ............................................................ 23
"CCS" centrifugal cleaning .................................... 23
Maintenance schedule .......................................... 24
TECHNICAL DATA
Technical data ....................................................... 25
Guide bar and chain combinations ....................... 26
EC-declaration of conformity ................................ 26
-
English 7