Product Assembly; Important; Electrical Shock Hazard - KitchenAid KSB1570WH Manual Del Usuario

PRODUCT ASSEMBLY

IMPORTANT: When moving your Blender, always lift from the Blender base.
Base will become disengaged from pitcher if carried by Blender pitcher or Blender pitcher
handle only.
1
Adjust the length of the Blender power
cord.
NOTE: When properly positioned, the pitcher will rest completely on the Blender base. If
not, repeat step 2. Make sure the pitcher is properly locked onto the Blender base.
Plug into a grounded outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
3
Put ingredients in the pitcher and firmly
place lid.
6
W11382496A.indb 6
2
Tab
Slot
Align the pitcher tabs with the slots on the
base.
Rotate the pitcher, approximately 1/8 turn
until it clicks into the place.
WARNING

Electrical Shock Hazard

4
Plug the Blender into a grounded 3 prong
outlet, and press POWER. The Power
indicator light will flash when ready.
8/7/2019 4:44:54 PM