Preparing The Blender For Use; Before First Use; Blender Assembly - KitchenAid KSB560 Instrucciones Y Recetas

preparing the Blender for use

Before first use

Before using your Blender for the first time,
wipe Blender base with a warm sudsy
cloth, then wipe clean with a damp cloth.
Dry with a soft cloth. Wash one-piece
pitcher, lid, and ingredient cap in warm,
sudsy water or just add soap and warm
water to the pitcher, place it on the Blender
base, and blend to clean (see Care and
Cleaning section). Rinse parts and wipe dry.

Blender assembly

1. Adjust the length of the power cord to
suit your needs.
2. Place the one-piece pitcher on the
Blender base.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire, or electrical shock.
3. Plug into a grounded 3-prong outlet.
Blender is now ready for operation.
4. Before removing the pitcher from the
base after use, always press OFF and
unplug the power cord. If using the
Pulse Mode, make sure the blinking
red light is off (by pressing OFF) then
unplug. Lift the pitcher in a straight,
upward motion off of the Blender base.
8