Idiomas disponibles
Idiomas disponibles
B Connecting to a power source
You can use the following power sources:
• AC power adaptor (see "Playing an audio
CD or ATRAC3plus/ATRAC3/MP3 files")
• Rechargeable batteries
• LR6 (size AA) alkaline batteries
For the battery life and charging time of the
rechargeable batteries, see "Specifications."
Using the batteries
Use only the following batteries for your CD
player.
Rechargeable batteries
Charge the rechargeable batteries before
using them for the first time.
• NH-7WMAA
• NH-WM2AA (NH-WMAA × 2)
Dry batteries
• LR6 (size AA) alkaline batteries
To insert the batteries
1
Open the battery compartment lid
inside your CD player.
2
Insert two batteries by matching
the 3 to the diagram in the battery
compartment and close the lid
until it clicks into place.
To charge the supplied
rechargeable batteries
1
Connect the AC power adaptor to the DC
IN 4.5 V jack of your CD player and an
AC outlet.
2
Press x/CHARGE to start charging.
The CD player charges the batteries. The
indicator sections of
succession and "Charging" appears in the
display. When the batteries are
completely charged, "Charging" and the
indicator get turned off.
If you press x/CHARGE after the charge
has already been completed, the
indicator flashes and "FULL" appears in
the display.
3
Disconnect the AC power adaptor.
To remove the batteries
Remove the batteries as illustrated below.
Insert # end first
(for both batteries).
light up in
(Continued)
27
-GB
