Hilti Nuron SC 6ML-22 Manual De Instrucciones Original página 35

6.1 Switching on or off
Switching on
1. Press and hold down the switch-on interlock and press the on/off button.
▶ You can release the switch-on interlock as soon as you have the on/off switch held down.
Switching off
2. Release the on/off switch.
▶ The switch-on interlock jumps automatically into the locked position.
6.2 Sawing along a line
Saw only flat workpieces that offer a big enough contact surface to accommodate the whole of the
base plate.
1. Position the workpiece so that the saw blade is free to rotate beneath it.
2. Secure the workpiece to prevent movement.
3. Bring the front edge of the base plate into contact with the workpiece.
▶ Saw blade clear of the workpiece.
4. Line up the marked line with the nick in the base plate (line-of-cut indicator).
5. Switch the product on. → page 29
6. Guide the saw along the cutting line at a suitable speed for it to cut smoothly through the workpiece.
6.3 Using chip collector
▶ Always install the chip collector when you are going to cut metals. Metal chips can be sharp-edged and
hot and lead to injuries.
▶ Make sure that the chip collector is empty. You can see the level of fill in the viewing window in the chip
collector (1).
As soon as you see dust and chips flying out of overflow opening (2) in the flap, empty the chip
collector (3).
▶ Before using the product, make sure that the flap of the chip collector is always closed.
6.4 Scaffold hook
The product has a scaffold hook that you can use to hook the product briefly to a railing, for example. To
use the scaffold hook, flip the scaffold hook 180° straight up.
When flipped out, the scaffold hook can be pivoted approx. 30° forward to the transport position.
Before flipping the scaffold hook back in, pivot the scaffold hook back approx. 30° to the initial position.
7 Care and maintenance
WARNING
Risk of injury with battery inserted !
▶ Always remove the battery before carrying out care and maintenance tasks!
Care of the product
• Carefully remove stubborn dirt.
• Carefully clean the air vents, if present, with a dry, soft brush.
• Use only a slightly damp cloth to clean the housing. Do not use cleaning agents containing silicone as
these can attack the plastic parts.
• Use a dry, clean cloth to clean the contacts of the product.
Care of the Li­ion batteries
• Never use a battery with clogged air vents. Clean the air vents carefully using a dry, soft brush.
*2360040*
7
8
2360040 English 29