Translation of the original instructions
EN
GYSPACK 660 / 750
SAFETY INSTRUCTIONS
This manual includes guidelines on the operation of your device
and the precautions to follow for your own safety. Ensure it is read
carefully before first use and keep it handy for future reference.
These instructions should be read and understood before anyone
operates the product. Any modifications or maintenance that
are not specified in the manual should not be undertaken. The
manufacturer is not liable for any injury or damage due to non-
compliance with the instruction manual. In case of problems or
uncertainties, please consult a qualified person that is able to
handle the device correctly. This device should only be used for
start-up and / or power supply within the limits indicated on
the device and in the manual. The safety instructions must be
followed. In case of improper or unsafe use, the manufacturer
cannot be held responsible.
Device suitable for indoor use only. Do not expose to rain or
excessive moisture.
This device may be used by children from age 8 and by persons
with reduced physical, sensory or mental capabilities or lack
of experience and knowledge, provided that they are under
supervision or have been told how to use the device safely and
are aware of the potential risks. Children must not use the device
as a plaything. Cleaning and servicing tasks may not be carried
out by children unless they are supervised.
Do not use for charging non-rechargeable batteries.
Do not use any charger other than the one supplied with the
machine to charge the batteries.
Do not operate the device with a damaged power supply cord
or a damaged mains plug.
Never charge a frozen or damaged battery.
Do not cover the device
Do not place the device near a fire or subject it to heat or to
longterm temperatures exceeding 50°C
Do not obstruct the cooling vents. Refer to the installation section
before operating the machine.
The automatic mode of operation and usage restrictions are
explained below in these operating instructions.
Risk of explosion or acid projection in case of short-circuit of the
clamps or if the 12V booster is connected to a 24V vehicle or
vice versa.
Risk of explosion and fire!
A battery being charged can emit explosive gas.
• During the charge, the battery must be placed in a well
ventilated area.
9